Envoy ACP/XF Configuration and Management Manual

WAN Subsystem Profiles and Modifiers for
EnvoyACP/XF
EnvoyACP/XF Configuration and Management Manual—429232-003
3-45
Optional Modifier Descriptions
TRANSLATE
Specifies that data in the information field is to be translated to and from EBCDIC. You
can set or override the setting for EBCDIC translation by issuing a SETMODE 19 call.
TRIB
See SUPR/TRIB on page 3-40.
TRNSLENGTH
When used with the XLATE attribute (described in XLATE on page 5-17),
TRNSLENGTH specifies how many octets of the information field are translated,
starting at the offset specified by the TRNSOFFSET modifier. If TRNSLENGTH n is
zero, all octets from TRNSOFFSET to the end of the information field are translated.
You can set or override this modifier by issuing a SETMODE 19 call in an application
or by issuing an SCF ALTER LINE command to the EnvoyACP/XF subsystem (note
that the TRNSLENGTH modifier is called XLATELENGTH in the EnvoyACP/XF
subsystem SCF product module).
Default: Not specified
Units: N/A
Range: N/A
Alternate
Modifier:
None. See also EBCDIC and ASCII.
Note. The TRANSLATE modifier appears when you specify the EBCDIC modifier.To remove
the TRANSLATE modifier, specify the ASCII modifier.
Default: 0
Units: Octets
Range: 0 to the value of FRAMESIZE
See
also:
TRNSOFFSET, FRAMESIZE