Envoy Configuration and Management Manual

Subsystem Control Facility (SCF) Commands for
Envoy
Envoy Configuration and Management Manual—429861-001
5-11
ALTER LINE Command
Table 5-3 and Table 5-4 show the ALTER attribute-set specifications for Envoy line
types:
Table 5-3. ALTER Attribute-Spec for Asynchronous Lines
Envoy Line Type Subtype Driver/Protocol Alter Attribute Set
ADM-2 multipoint supervisor 8 ASYNC/ADM2 ASCNET
TINET multipoint supervisor 9 ASYNC/TINET ASCNET
Burroughs multipoint 10 ASYNC/BURR ASCBURPTP
ASC SIMPLEX 40 SIMPLEX/ASYNC ASC
Table 5-4. ALTER Attribute-Spec for Byte-Synchronous Lines
Envoy Line Type Subtype Driver/Protocol Alter Attribute Set
BSC point-to-point
nonswitched
0 BISYNC/BSC BSCPTP
SWIFT point-to-point 0 BISYNC/SWIFT BSCPTP
BSC point-to-point switched 1 BISYNC/BSC BSCPTP
SWIFT point-to-point
switched
1 BISYNC/SWIFT BSCPTP
BSC multipoint tributary 2 BISYNC/BSC BSCMPTRIB
BSC multipoint supervisor 3 BISYNC/BSC BSCMPSUPV
Burroughs multipoint
supervisor
10 BISYNC/ADM2 BSCMPSUPV
Burroughs point-to-point 13 BISYNC/BURR BSCBURPTP
FDX, WRITE 30 FDX/FDX FDX
FDX, READ 31 FDX/FDX FDX
FDX, WRITE NASDAQ 32 FDX^NAQ/FDX FDX
FDX, READ NASDAQ 33 FDX^NAQ/FDX FDX