Envoy Configuration and Management Manual

Subsystem Control Facility (SCF) Commands for

Envoy

Envoy Configuration and Management Manual—429861-001

5-12

ALTER LINE ASC Command

The attribute-spec for the ALTER LINE ASC command (asynchronous lines) is one of

the following attribute name and value combinations. The attributes are listed

alphabetically in Section 3, WAN Subsystem Profiles and Modifiers for Envoy

Example

The following command alters the line $EVY1, including the BAUD value and the

STOPBIT attribute:

-> ALTER LINE $EVY1, ASC, BAUD 1200, STOPBIT OFF

[ CONNTYPE { PPSW | PPNSW } ]

[ BAUD { 50 | 75 | 110 | 134.5 | 150 | 200 | 300 | 600 }

{ 1200 | 1800 | 2400 | 3600 | 4800 | 7200 | 9600 }

{ 19200 }

[ CHARSIZE { 5 | 6 | 7 | 8 } ]

[ STOPBIT { OFF | ON } ]

[ PARITY { EVEN | NONE | ODD } ]

[ NOPARITYCHK { OFF | ON } ]

[ ECHO { OFF | ON } ]

[ READONLY { OFF | ON } ]

[ TCHAR1 { 0 through 255 } ]

[ TCHAR2 { 0 through 255 } ]

[ TCHAR3 { 0 through 255 } ]

[ TCHAR4 { 0 through 255 } ]

[ BUFFER { DEDICATED | POOLED } ]

[ BUFSIZE { 0 through 32767 } ]

[ ETX { 0 through 255 } ]

[ CTLTERM { 0 | 1 | 2 } ]

[ BREAKENA { OFF | ON } ]

[ ASYNCINTF { CL | EIA } ]

[ DUAL212 { OFF | ON } ]

[ DSRSENSE { OFF | ON } ]

[ TPAUSE { OFF | ON } ]

[ THRESHOLD { 0 through 255 } ]

[ TIMEOUT { 0 through 32767 } ]