Envoy Configuration and Management Manual

Subsystem Control Facility (SCF) Commands for

Envoy

Envoy Configuration and Management Manual—429861-001

5-13

ALTER LINE ASCBURPTP Command

The attribute-spec for the ALTER LINE ASCBURPTP command (Burroughs

asynchronous point-to-point lines) is one of the following attribute name and value

combinations. The attributes are listed alphabetically in Section 3, WAN Subsystem

Profiles and Modifiers for Envoy.

Example

The following command alters the line $EVY1, including the PARITY value and the

ECHO attribute:

-> ALTER LINE $EVY1, ASCBURPTP, PARITY EVEN, ECHO OFF

[ CONNTYPE { PPSW | PPNSW } ]

[ BAUD { 50 | 75 | 110 | 134.5 | 150 | 200 | 300 | 600 }

{ 1200 | 1800 | 2400 | 3600 | 4800 | 7200 | 9600 }

{ 19200 }

[ CHARSIZE { 5 | 6 | 7 | 8 } ]

[ STOPBIT { OFF | ON } ]

[ PARITY { EVEN | NONE | ODD } ]

[ ECHO { OFF | ON } ]

[ TCHAR1 { 0 through 255 } ]

[ TCHAR2 { 0 through 255 } ]

[ TCHAR3 { 0 through 255 } ]

[ TCHAR4 { 0 through 255 } ]

[ BUFFER { DEDICATED | POOLED } ]

[ BUFSIZE { 0 through 32767 } ]

[ ASYNCINTF { CL | EIA } ]

[ THRESHOLD { 0 through 255 } ]

[ TIMEOUT { 0 through 32767 } ]

[ RETRIES { 0 through 255 } ]