Envoy Configuration and Management Manual

Subsystem Control Facility (SCF) Commands for

Envoy

Envoy Configuration and Management Manual—429861-001

5-14

ALTER LINE ASCNET Command

The attribute-spec for the ALTER LINE ASCNET command (ADM2 or TINET

asynchronous point-to-point lines) is one of the following attribute name and value

combinations. The attributes are listed alphabetically in Section 3, WAN Subsystem

Profiles and Modifiers for Envoy.

Example

The following command alters the line $EVY1, including the POLLINT value and the

ECHO attribute:

-> ALTER LINE $EVY1, ASCNET, POLLINT 50, ECHO OFF

[ BAUD { 50 | 75 | 110 | 134.5 | 150 | 200 | 300 | 600 }

{ 1200 | 1800 | 2400 | 3600 | 4800 | 7200 | 9600 }

{ 19200 }

[ CHARSIZE { 5 | 6 | 7 | 8 } ]

[ STOPBIT { OFF | ON } ]

[ PARITY { EVEN | NONE | ODD } ]

[ ECHO { OFF | ON } ]

[ TCHAR1 { 0 through 255 } ]

[ TCHAR2 { 0 through 255 } ]

[ TCHAR3 { 0 through 255 } ]

[ TCHAR4 { 0 through 255 } ]

[ BUFFER { DEDICATED | POOLED } ]

[ BUFSIZE { 0 through 32767 } ]

[ ASYNCINTF { CL | EIA } ]

[ POLLINT { 0 through 32767 } ]

[ THRESHOLD { 0 through 255 } ]

[ TIMEOUT { 0 through 32767 } ]

[ RETRIES { 0 through 255 } ]