Envoy Configuration and Management Manual

Subsystem Control Facility (SCF) Commands for

Envoy

Envoy Configuration and Management Manual—429861-001

5-17

ALTER LINE BSCMPTRIB Command

The attribute-spec for the ALTER LINE BSCMPTRIB command (byte-synchronous

multipoint tributary lines) is one of the following attribute name and value

combinations. The attributes are listed alphabetically in Section 3, WAN Subsystem

Profiles and Modifiers for Envoy.

Example

The following command alters the line $EVY1, including the POLLADDR value and

the SELADDR attribute:

-> ALTER LINE $EVY1, BSCMPTRIB, POLLADDR 64, SELADDR 65

[ SYNCS { 2 through 15 } ]

[ CHARSET { ASCII | EBCDIC | KATAKANA } ]

[ CHARSIZE { 5 | 6 | 7 | 8 } ]

[ BLOCKCHK { CCITT | CRC16 | LRC8 } ]

[ BUFFER { DEDICATED | POOLED } ]

[ BUFSIZE { 0 through 32767 } ]

[ ITBSIZE { 0 through 32767 } ]

[ ACKSEQ { ASCII | BSYNC } ]

[ POLLADDR { 0 through 255 } ]

[ SELADDR { 0 through 255 } ]

[ BISYNCINTF { RS232 | RS422 } ]

[ DTR { OFF | ON } ]

[ CLEARRTS { OFF | ON } ]

[ RAISERTS { OFF | ON } ]

[ MONITORCTS { OFF | ON } ]

[ MONITORCD { OFF | ON } ]

[ THRESHOLD { 0 through 255 } ]

[ TIMEOUT { 0 through 32767 } ]

[ RETRIES { 0 through 255 } ]

[ SPEED { 6 | 12 | 18 | 24 | 36 | 48 | 72 | 96 | 192 | 384 }

{ 480 | 560 }

Note. POLLADDR and SELADDR can be entered alternately in the form of text characters.

For example, ALTER LINE $EVY1, BSCMPTRIB, POLLADDR “A,” SELADDR “B.”