Envoy Configuration and Management Manual

Subsystem Control Facility (SCF) Commands for
Envoy
Envoy Configuration and Management Manual—429861-001
5-18
ALTER LINE BSCPTP Command
ALTER LINE BSCPTP Command
The attribute-spec for the ALTER LINE BSCPTP command (byte-synchronous point-to-
point lines) is one of the following attribute name and value combinations. The
attributes are listed alphabetically in Section 3, WAN Subsystem Profiles and Modifiers
for Envoy.
Example
The following command alters the line $EVY1, including the DTR value and the
THRESHOLD attribute:
-> ALTER LINE $EVY1, BSCPTP, DTR ON, THRESHOLD 150
[ CONNTYPE { PPSW | PPNSW } ]
[ STATIONTYPE { PRIMARY | SECONDARY } ]
[ MULTILEAVING { OFF | ON } ]
[ SYNCS { 2 through 15 } ]
[ CHARSET { ASCII | EBCDIC | KATAKANA } ]
[ CHARSIZE { 5 | 6 | 7 | 8 } ]
[ BLOCKCHK { CRC16 | CCITT | LRC8 } ]
[ SWIFT { OFF | ON } ]
[ BUFFER { DEDICATED | POOLED } ]
[ BUFSIZE { 0 through 32767 } ]
[ ITBSIZE { 0 through 32767 } ]
[ ACKSEQ { ASCII | BISYNC } ]
[ BISYNCINTF { RS232 | RS422 } ]
[ DTR { OFF | ON } ]
[ CLEARRTS { OFF | ON } ]
[ RAISERTS { OFF | ON } ]
[ MONITORCTS { OFF | ON } ]
[ MONITORCD { OFF | ON } ]
[ IDEXCHG { OFF | ON } ]
[ NOERRDIFF { OFF | ON } ]
[ THRESHOLD { 0 through 255 } ]
[ TIMEOUT { 0 through 32767 } ]
[ RETRIES { 0 through 255 } ]
[ SPEED { 6 | 12 | 18 | 24 | 36 | 48 | 72 | 96 | 192 | 384 }
{ 480 | 560 }