Envoy Configuration and Management Manual

Subsystem Control Facility (SCF) Commands for
Envoy
Envoy Configuration and Management Manual—429861-001
5-23
INFO DEVICE Command
PATH
specify this attribute to display only the SWAN concentrator PATH.
PROFILE
specify this attribute to display only the PROFILE object.
RECSIZE
specify this attribute to display only the RECSIZE attribute.
TYPE
for the INFO DEVICE command, specify this attribute to display only the type and
subtype for the DEVICE.
OBEYFORM
causes the INFO command to display the information about the device in the form
of ADD DEVICE commands.
Examples
The format of the display for the INFO DEVICE command is shown in Example 5-1.
Following are definitions for the display fields not defined under the command syntax:
Unit
is a logical entity that facilitates the configuration of MULTI lines. For more
information, refer to the information on full-duplex protocols in the Envoy
Application Programming Manual.
Alternate Cpu
indicates the number of the alternate CPU.
Preferred Cpu
indicates the number of the preferred CPU.
Example 5-1. INFO DEVICE Command
6-> info device #asca
WAN MANAGER Detailed Info Device \IDC12.$ZZWAN.#ASCA
*Adapter Name..... SWAN02 *Clip ............ 1
*Line ............ 1 *Unit ............ 0
*Path ............ A Profile........... PENVSIM
*RecSize.......... 512 Preferred Cpu..... 2
Alternate Cpu..... 3 *Type............. ( 7,40)
*HIGHPIN.......... ON
*IOPOBJECT........ \IDC12.$SWAN.T9051ABV.OENVOYR