Envoy Configuration and Management Manual

Subsystem Control Facility (SCF) Commands for
Envoy
Envoy Configuration and Management Manual—429861-001
5-24
INFO DEVICE Command
HIGHPIN
indicates whether the data communications subsystem object is to be run highpin
ON or OFF.
The format of the display for the INFO DEVICE command with the DETAIL option is
shown in Example 5-2
.
Following are definitions for the display fields not defined under the command syntax.
For more information, refer to Section 3, WAN Subsystem Profiles and Modifiers for
Envoy.
DEVICE SPECIFIC MODIFIERS:
ONEUNIT
specifies one unit per logical line.
INSPECTOFF
causes the Envoy subsystem not to enter Inspect when the Envoy line-handler
process is started.
EMSOFF
causes event messages to be sent to the console as determined by the value of
the ZEMS-TKN-CONSOLE-PRINT token.
Example 5-2. INFO DEVICE DETAIL Command
8-> info device #asca,detail
WAN MANAGER Detailed Info Device \IDC12.$ZZWAN.#ASCA
*Adapter Name..... SWAN02 *Clip ............ 1
*Line ............ 1 *Unit ............ 0
*Path ............ A Profile........... PENVSIM
*RecSize.......... 512 Preferred Cpu..... 2
Alternate Cpu..... 3 *Type............. ( 7,40)
*HIGHPIN.......... ON
*IOPOBJECT........ \IDC12.$SWAN.T9051ABV.OENVOYR
DEVICE SPECIFIC MODIFIERS:
ONEUNIT
INSPECTOFF
EMSOFF
TRACEOFF
DEDICATED
BUFSIZE 1024
.
.
.