Envoy Configuration and Management Manual

Envoy Configuration and Management Manual—429861-001
xi
About This Manual
This manual describes configuration and management of an Envoy subsystem running
on a Compaq NonStop™ Himalaya S-series server.
Who Should Use This Manual
This manual is written for those who provide the following services for the server and
the software environment at a particular site:
•
Planning
•
Installation and configuration
•
Maintenance, optimization, and troubleshooting
How This Manual Is Organized
This manual has the following sections:
Section Title This Section...
1 Configuration Quick Start Provides instructions for creating a profile,
configuring new and existing Envoy
communications lines, and starting a line
.
2 Introduction to Envoy Describes the Envoy communications interface,
NonStop Himalaya S-series server architecture,
protocols supported, and data links.
3 WAN Subsystem Profiles
and Modifiers for Envoy
Describes the WAN subsystem profiles and
modifiers for Envoy line configuration.
4 Subsystem Control Facility
(SCF) for Envoy
Describes the tasks you can perform using SCF,
DSM, and SCF basics, and the objects for Envoy.
5 Subsystem Control Facility
(SCF) Commands for Envoy
Provides command syntax and definitions for
Envoy SCF commands and the WAN subsystem
commands used by Envoy.
6 Tracing Describes the PTrace interface, command syntax,
and fields of sample trace records.
A Envoy Subsystem Error
Messages
Describes the SCF error messages for Envoy,
including cause, effect, and recovery.
B Envoy Event Messages Describes the content and meaning of all event
messages generated by the Envoy subsystem.
C Envoy SCF Command
Syntax Summary
Provides a command syntax summary for Envoy
SCF commands.
D S-Series Changes to Envoy Describes changes and migration considerations
involved in moving Envoy to S-series servers.
Glossary Defines terms used in this manual.