Envoy Configuration and Management Manual

Subsystem Control Facility (SCF) Commands for
Envoy
Envoy Configuration and Management Manual—429861-001
5-43
STATS LINE Command
The following command resets statistics counters for the line $ASCA:
-> STATS LINE $ASCA, RESET
The format of the display for the STATS LINE command is shown in Example 5-10.
The information listed in the statistics display apply only after the last RESET and/or
cold start.
Sampletime
is the current date and time.
Resettime
is the date and time the last reset operation was performed.
Msgs Sent
shows the total number of messages sent by Envoy between the last reset and the
current sample time.
Msgs Received
shows the total number of messages received by Envoy between the last reset and
the current sample time.
Blks In use High Cnt
shows the largest single block received by Envoy between the last reset and the
current sample time.
NAKS Received
shows the number of negative acknowledgments (NAKS) received by Envoy on the
line.
Example 5-10. STATS LINE Command
21-> stats line $asca
ENVOY Stats LINE \IDC12.$ASCA
Sampletime........ 04 Aug 2000, 18:43:10.360
Resettime......... 04 Aug 2000, 18:39:04.853
Msgs Sent......... 75 Msgs Received..... 74
Blks Inuse Hi Cnt. 1
Naks Received..... 0 BCC Erros......... 0
Format Errors..... 0 Text Errors....... 0
Retries........... 0 No Blks........... 0