Envoy Configuration and Management Manual

Subsystem Control Facility (SCF) Commands for
Envoy
Envoy Configuration and Management Manual—429861-001
5-45
STATUS DEVICE Command
STATUS DEVICE Command
The WAN subsystem STATUS DEVICE command displays current status and
configuration information about a data communications subsystem object.
The command syntax is as follows:
$ZZWAN.#device-name
indicates the name of the DEVICE object in the configuration database and is also
the name of the corresponding data communications subsystem object, as specified
in the ADD DEVICE command. You can use the asterisk (*) to specify all
configured DEVICE objects.
Example
The format of the display for the STATUS DEVICE command is shown in
Example 5-11.
State
is the current summary state of the LINE object.
LDEV number
is the logical device number of the line.
PPIN
is the PIN of the primary Envoy I/O process.
BPIN
is the PIN of the backup Envoy I/O process.
STATUS DEVICE $ZZWAN.#device-name
Example 5-11. STATUS DEVICE Command
25-> status device #asca
WAN Manager STATUS DEVICE for DEVICE \IDC12.$ZZWAN.#ASCA
State :......... STOPPED
LDEV number..... 446
PPIN............ 2 ,290 BPIN............ 3 ,363