Envoy Configuration and Management Manual

Subsystem Control Facility (SCF) Commands for

Envoy

Envoy Configuration and Management Manual—429861-001

5-46

STATUS LINE Command

The STATUS command displays information about the current state of lines, such as the

dynamic state, the backup I/O address, and other relevant subsystem-specific attributes

and values. This is not a sensitive command.

The command syntax is as follows:

OUT file-spec

causes any SCF output generated for this command to be directed to the specified

file.

LINE line-name

designates the line whose status information is to be displayed. If you omit line-

name, the status of the assumed line is displayed (for information about the

ASSUME command, see the SCF Reference Manual for G-Series Releases).

DETAIL

if present, returns complete status information. If you omit DETAIL, you see only a

single line of data for each object name.

Examples

The format of the display for the STATUS LINE command without the DETAIL option

is shown in Example 5-12.

Name

indicates the name of the line.

State

is the current summary state of the LINE object.

LDEV

is the logical device number of the line.

STATUS [ / OUT file-spec / ] [ LINE line-name ] [ , DETAIL ]

Example 5-12. STATUS LINE Command

26-> status line $asca

ENVOY Status Line

Name State LDEV PPID CLIP / LINE BPID Track Id

$ASCA STOPPED 446 (02,290) (%1 , %1) (03,363) X017HB