Envoy Configuration and Management Manual

Subsystem Control Facility (SCF) Commands for
Envoy
Envoy Configuration and Management Manual—429861-001
5-47
STATUS LINE Command
PPID
is the CPU number and PIN of the primary Envoy I/O process.
CLIP clipnum
is the communications line interface processor (CLIP) on the SWAN concentrator
specified by concname.
LINE linenum
is the line number (0 or 1) on the selected CLIP specified by clipnum.
BPID
is the CPU number and PIN of the backup Envoy I/O process.
Track Id
is the unique number that represents a SWAN concentrator box. Every SWAN
concentrator box has a unique track ID.
The format of the display for the STATUS LINE command with the DETAIL option is
shown in Example 5-13
.
Following are definitions for the display fields not defined under the previous example:
Cur No.of Openers
shows how many opens exist on the line.
Trace
shows whether trace is turned on or off.
Example 5-13. STATUS LINE DETAIL Command
31-> status line $asca,detail
ENVOY Detailed Status Line \IDC12.$ASCA
State............ STOPPED LDEV............. 446
Primary Pid...... (02,290) Backup Pid....... (03,363)
CLIP............. %1 LINE............. %1
Track Id......... X017HB Cur No.of Openers 0
Trace............ OFF CMG Ldev......... 79
CMG.............. $ZZW02
Path............. A
Preferred IP..... 192.168.010.168
Alternate IP..... 192.168.011.168