Envoy Configuration and Management Manual

Envoy Event Messages
Envoy Configuration and Management Manual—429861-001
B-7
5: ZENV-EVT-IOPROCABENDMESS
ZENV-VAL-ABEND-INTHDLR-DRV
The special interrupt handler specified for the line does not work with the
specified driver. The error-dependent portion of the message displays the
interrupt handler name and driver name:
Interrupt Handler interrupt handler
Driver driver
ZENV-VAL-ABEND-LOCK-MEM
Unable to lock memory. The error-dependent portion of the message displays
the requested pool size:
Returned Error #error number
ZENV-VAL-ABEND-NO-DEDICATED
The line requires that a dedicated buffer be defined. This message has no error-
dependent portion.
ZENV-VAL-ABEND-NOT-ONEUNIT
The line is not a one-unit Envoy line. The error-dependent portion of the
message displays the subdevice type:
Device Subtype #device type
ZENV-VAL-ABEND-NOT-TWOUNIT
The line is not a two-unit Envoy line. The error-dependent portion of the
message displays the subdevice type:
Device Subtype #device type
ZENV-VAL-ABEND-NUM-CTLRS
The I/O process has been configured to support more than 16 controllers.
ZENV-VAL-ABEND-NUM-UNITS
The number of units defined for all lines supported by the I/O process exceeds
the maximum allowed. The maximum is 32. The error-dependent portion of the
message displays the number of units being used:
Number of Units number of units
ZENVVAL-ABEND-NO-DEDICATED
The dedicated I/O buffer is not defined. The dedicated I/O buffer pointer is
invalid. This message has no error-dependent portion.