Envoy Configuration and Management Manual

Envoy Event Messages
Envoy Configuration and Management Manual—429861-001
B-20
1002: ZENV-EVT-BADIIOSTATUS
ZCDG-TKN-IIO-RIST
Contains the interrupt status word. RIST is the Read Interrupt Status word.
ZCDG-TKN-RESIDUE
Contains the residue transfer count.
ZENV-TKN-FILE-ERR
Contains the file-system error code.
ZENV-TKN-DRV-REQ
Contains the driver request, as follows:
ZENV-VAL-DRV-REQ-UNKWN
ZENV-VAL-DRV-REQ-CLEAR
ZENV-VAL-DRV-REQ-CONFIG
ZENV-VAL-DRV-REQ-RD
ZENV-VAL-DRV-REQ-WR-TEXT
ZENV-VAL-DRV-REQ-WR-CNTL
ZENV-VAL-DRV-REQ-WR-TEXT-RD
ZENV-VAL-DRV-REQ-WR-CNTL-RD
ZENV-VAL-DRV-REQ-POLL
ZENV-VAL-DRV-REQ-MODEM-CNTL
ZENV-VAL-DRV-REQ-STOP-POLL
ZENV-VAL-DRV-REQ-SEL
ZENV-VAL-DRV-REQ-FREE-BLK
ZENV-VAL-DRV-REQ-STOP-RD
ZENV-VAL-DRV-REQ-SET-RD
ZENV-VAL-DRV-REQ-GET-LB-INFO
ZENV-VAL-DRV-REQ-GET-AB-INFO
ZENV-VAL-DRV-REQ-GET-MCODE-ID
ZENV-VAL-DRV-REQ-OWN-DELAY
Probable Cause
An EIO error was detected in the range 214 through 225. The following errors are
possible:
•
FECHTIMEOUT = 214
Channel timeout.
•
FEMEMABS = 215
I/O was attempted against an absent memory page.
•
FEMEMBRKPT = 216
Memory breakpoint encountered during this I/O.