Envoy Configuration and Management Manual

Envoy Configuration and Management Manual—429861-001
Index-1
Index
Numbers
10Base-T Ethernet connections 2-3
3602 byte-synchronous controller 2-3, D-1
3602 controller emulator 2-3
3603 asynchronous controller 2-3, D-1
3603 controller emulator 2-3
A
ABORT command 5-3
ACKOFF modifier 3-8
ACKON modifier 3-8
ADD ADAPTER command 1-4
ADD command 5-20
ADD DEVICE command 1-3, 1-5, 2-5, 5-4,
5-20
ADD PATH command 1-5, 5-5
ADD PROFILE command 1-2, 1-9, 5-6/5-7
ADM communication protocol 3-1
ADM-2
multipoint supervisor line type 5-11
protocol 2-6
ALTER attribute-spec 5-11
ALTER command 5-10
ALTER DEVICE command 1-7, 1-10, 5-8
ALTER LINE ASC command 5-12
ALTER LINE ASCBURPTP
command 5-13
ALTER LINE ASCNET command 5-14
ALTER LINE BSCBURPTP
command 5-15
ALTER LINE BSCMPSUPV
command 5-16
ALTER LINE BSCMPTRIB
command 5-17
ALTER LINE BSCPTP command 5-18
ALTER LINE command 1-11, 4-3
ALTER LINE FDX command 5-19
ASC communication protocol 3-1
ASC SIMPLEX line type 5-11
ASCII
character set 2-4
internal character code 2-4
modifier 3-8
ASCII to EBCDIC code conversion 2-4
ASSUME command 4-4
Asynchronous
communications line 2-2
concentrator type 2-6
devices 2-2
protocol 2-6
Attributes, for SCF commands 5-3/5-57
Auto-call unit (ACU) D-4
B
BAUD modifier 3-8
BCC 3-13
Bell modems 2-3
BISYNC protocol 2-6
Bit-synchronous devices 2-2
BREAKENA modifier 3-9
BSC
communication protocol 3-1
multipoint supervisor line type 5-11
multipoint tributary line type 5-11
point-to-point nonswitched line
type 5-11
point-to-point switched line type 5-11
BSCCHAR modifier 3-9
BUFSIZE modifier 3-9
Burroughs
multipoint line type 5-11
multipoint supervisor line type 5-11
point-to-point line type 5-11
protocol 2-6