Envoy Configuration and Management Manual

WAN Subsystem Profiles and Modifiers for Envoy
Envoy Configuration and Management Manual—429861-001
3-10
Modifier Descriptions
You specify the value for RSIZE/RECSIZE on the Configure Modifier Information
dialog box in WAN Wizard Pro.
CBSENSEOFF
Default: CBSENSEOFF
Units: Not applicable
Range: Not applicable
Alternate modifier: CBSENSEON
This modifier applies to BSC lines only. It disables monitoring of the Clear-to-Send
(CB) signal during data transmission.
CBSENSEON
Default: CBSENSEOFF
Units: Not applicable
Range: Not applicable
Alternate modifier: CBSENSEOFF
This modifier applies to BSC lines only. It enables monitoring of the Clear-to-Send (CB)
signal during data transmission. If a signal loss is detected, a modem error is reported.
For BSC lines, the HALF and FULL modifiers have no meaning. Instead, the operation
and control of the modem signals are defined by CBSENSEON, CFSENSEON,
CFSENSEOFF, CLEARCA, NOCLEARCA, CTLRCF, and NOCTLRCF.
CCITTON
Default: CRC16
Units: Not applicable
Range: Not applicable
Alternate modifiers: CRC16, LRC8
This modifier applies to BSC lines only. It causes CCITT block-check characters (BCC)
to be generated.
CFSENSEOFF
Default: CFSENSEOFF
Units: Not applicable
Range: Not applicable
Alternate modifier: CFSENSEON