Envoy Configuration and Management Manual

WAN Subsystem Profiles and Modifiers for Envoy
Envoy Configuration and Management Manual—429861-001
3-21
Modifier Descriptions
KATAKANA
Default: Not specified
Units: Not applicable
Range: Not applicable
Alternate modifier: None
This modifier applies to BSC lines only. It causes the KATAKANA character set to be
used. Inbound data is translated from KATAKANA to ASCII. Outgoing data is
translated from ASCII to KATAKANA.
CTLR6297 appears automatically when you specify the KATAKANA modifier.
Once this modifier is added to the device record, it can only be removed by using the
SCF ALTER DEVICE command with the RESET modifier option.
LEADEOT
Default: LEADEOT
Units: Not applicable
Range: Not applicable
Alternate modifier: NOLEADEOT
This modifier applies to BSC lines only. It specifies that both a poll and a select are
preceded with EOT.
LEOTRESYN
Default: Not specified
Units: Not applicable
Range: Not applicable
Alternate modifier: Not applicable
This modifier applies to BSC lines only. It causes the communications line interface
processor (CLIP) to reset to SYNC search mode after receiving the lead EOT.
LRC8
Default: CRC16
Units: Not applicable
Range: Not applicable
Alternate modifiers: CC1R6, CCITTON