Envoy Configuration and Management Manual

WAN Subsystem Profiles and Modifiers for Envoy
Envoy Configuration and Management Manual—429861-001
3-26
Modifier Descriptions
NOERRDIFF
Default: NOERRDIFF
Units: Not applicable
Range: Not applicable
Alternate modifier: ERRDIFF
This modifier applies to BSC lines only. It causes error 171 to be returned for no-
response conditions.
NOLEADEOT
Default: LEADEOT
Units: Not applicable
Range: Not applicable
Alternate modifier: LEADEOT
This modifier applies to BSC lines only. It specifies that both a poll and a select are not
preceded with an EOT.
NOLEOTRESYN
Default: NOLEOTRESYN
Units: Not applicable
Range: Not applicable
Alternate modifier: LEOTRESYN
This modifier applies to BSC lines only. It instructs the communications line interface
processor (CLIP) not to reset SYNC search mode after receiving the lead EOT.
NONE
Default: EVEN for ADM and TINET lines; NONE for SIMPLEX and ASC lines
Units: Not applicable
Range: Not applicable
Alternate modifiers: EVEN, ODD
This modifier applies to ADM, TINET, SIMPLEX, and ASC lines only. It indicates that
parity is not generated. If CHAR8 is specified for an ADM or TINET line, NONE must
also be specified.