Envoy Configuration and Management Manual

Contents
Envoy Configuration and Management Manual—429861-001
vi
D. S-Series Changes to Envoy (continued)
D. S-Series Changes to Envoy (continued)
FDX Line Changes D-4
No Support for Auto-Call Unit
D-4
Glossary
Index
Examples
Example 1-1. Adding a Profile 1-3
Example 1-2.
Adding a Line-Handler Process 1-6
Example 1-3.
Starting the Line-Handler Process 1-6
Example 1-4.
Starting the Line 1-7
Example 1-5.
Stopping the Device 1-9
Example 1-6.
Deleting the Device 1-9
Example 1-7.
Changing the Modifier Definitions in the PROFILE Object Using the
LIKE Attribute 1-9
Example 1-8.
Re-Adding the DEVICE Object, Associating the Modified PROFILE
Object 1-10
Example 1-9.
Starting the Device 1-10
Example 1-10.
Stopping the Device to Change a Modifier 1-10
Example 1-11.
Altering the Device to Change a Modifier 1-10
Example 1-12.
Restarting the Process 1-10
Example 1-13.
Stopping the Line to Change the Line Object Attribute 1-11
Example 1-14.
Changing the Line Object Attribute 1-11
Example 1-15.
Restarting the Line 1-11
Example 5-1.
INFO DEVICE Command 5-23
Example 5-2.
INFO DEVICE DETAIL Command 5-24
Example 5-3.
INFO LINE Command 5-26
Example 5-4.
INFO LINE DETAIL Command for ASC Alter Attribute Set 5-27
Example 5-5.
INFO PROFILE Command 5-33
Example 5-6.
NAMES Command 5-35
Example 5-7.
NAMES DEVICE Command 5-36
Example 5-8.
NAMES LINE Command 5-37
Example 5-9.
NAMES PROCESS Command 5-38