Envoy Configuration and Management Manual

WAN Subsystem Profiles and Modifiers for Envoy
Envoy Configuration and Management Manual—429861-001
3-37
Modifier Descriptions
THRESHOLD n
Default: 100
Units: Buffer segments
Range: 0 through 255
Alternate modifier: None
This modifier applies to all Envoy line types. It specifies the statistics threshold value
used to generate statistics events. Internally, Envoy has four statistics error counters. If
the sum of the error counters exceeds the threshold value specified, a statistic event is
generated. This modifier can be altered with a call to SETMODE 18.
For information on the format of statistics messages, see the Envoy Application
Programming Manual.
TIMEOUT n
Default: 270 for ADM, TINET, and ASC lines; 150 for SIMPLEX and BSC lines
Units: .01 seconds
Range: 0 through 32567
Alternate modifier: None
This modifier applies to all Envoy line types. It specifies the processor input/output (I/O)
timeout. TIMEOUT can be altered with SETMODE 15.
Table 3-4. TCHAR Modifiers and Their Default Values
Modifier Default Value
TCHAR1 6 for ADM and TINET lines
128 for SIMPLEX and ASC lines
TCHAR2 21 for ADM and TINET lines
255 for SIMPLEX and ASC lines
TCHAR3 4 for ADM, TINET, and ASC lines
128 for SIMPLEX lines
TCHAR4 5 for ADM and TINET lines
3 for ASC lines
255 for SIMPLEX lines
Note. If you alter TIMEOUT with a call to SETMODE 15, the next wait for the DSR call will not
time out.