Envoy Configuration and Management Manual

WAN Subsystem Profiles and Modifiers for Envoy
Envoy Configuration and Management Manual—429861-001
3-39
Modifier Descriptions
This modifier applies to all Envoy line types. It specifies two units per logical line. Use
the TWOUNIT modifier when configuring a BSC line connected to two units.
TYPE
Default: None
Units: Not applicable
Range: Not applicable
Alternate modifier: Not applicable
This modifier identifies each Envoy line. Table 3-2
on page 3-2 shows the TYPE and
SUBTYPE values for Envoy lines. Envoy lines are always TYPE 7.