Ethernet Adapter Installation and Support Guide

Relocating an E4SA
Ethernet Adapter Installation and Support Guide—425684-003
4-19
Stop the E4SA
2. Stop access to the logical interfaces (LIFs) associated with the Ethernet 4
ServerNet adapter (E4SA) to be relocated.
Use the SCF STOP LIF command for each LIF:
STOP LIF $ZZLAN.lif-name
STOP LIF $ZZLAN.lif-name
STOP LIF $ZZLAN.lif-name
STOP LIF $ZZLAN.lif-name
If you receive a message that the LIF clients are still active, use the SCF
ABORT LIF command to remove the LIFs.
3. Verify that the LIFs associated with the E4SA to be relocated are in the STOPPED
state.
Use the SCF STATUS LIF command:
STATUS LIF $ZZLAN.*
Example 4-24 shows the output of this command. Note that the logical
interfaces (LIFs) are in the STOPPED state.
4. Stop the E4SA object and its subordinate objects.
You can use either SCF or the TSM Service Application to perform this step.
a. Using SCF to Stop the Adapter:
Use the SCF STOP ADAPTER command with the SUB ALL option The SUB
ALL option stops the ADAPTER object and all its subordinate objects.
STOP ADAPTER $adapter-name, SUB ALL
b. Using the TSM Service Application to Stop the Adapter:
1. Log on to the TSM Service Application.
2. In the
Tree view, select the E4SA.
3. From the
Display menu, choose Actions.
4. Select Stop.
5. Click Perform action.
Example 4-24. SCF STATUS LIF Command
->STATUS LIF $ZZLAN.*
SLSA Status LIF
Name State Access State
$ZZLAN.L018 STOPPED UP
$ZZLAN.L019 STOPPED UP
$ZZLAN.L01A STOPPED UP
$ZZLAN.L01B STOPPED UP