Ethernet Adapter Installation and Support Guide

Relocating an E4SA
Ethernet Adapter Installation and Support Guide—425684-003
4-25
Remove and Install the Adapter
Figure 4-6 shows how to pull the E4SA out of the slot.
5. Move the E4SA to the new slot.
a. Disconnect the grounding clip of your ESD wriststrap from the system
enclosure, and connect it to an exposed, unpainted metal surface on the
E4SA.
b. Grasp the E4SA by its ejector with one hand, and support the bottom edge of
the E4SA with the other hand. Carry the E4SA to the slot where it is to be
installed.
Figure 4-6. Removing an E4SA
Note. The E4SA weights 6.75 pounds (3 kilograms)
059CDT .CDD