Ethernet Adapter Installation and Support Guide

Installing a New E4SA
Ethernet Adapter Installation and Support Guide—425684-003
2-12
Unpack and Install the New E4SA
4. Disconnect the grounding clip of your ESD wriststrap from the enclosure.
5. Connect the RJ-45 connectors to the Ethernet ports on the E4SA. Connect the
other ends of the cables to your Ethernet hub. Use the labels on the cables to
make sure you connect each cable to the proper port and Ethernet hub.
Figure 2-8 on page 2-13 shows the connection of the communication cable
between the E4SA and vendor Ethernet hub.
Figure 2-7. Installing a E4SA
058CDT .CDD