Ethernet Adapter Installation and Support Guide

Contents
Ethernet Adapter Installation and Support Guide—425684-003
iii
4. Relocating an E4SA (continued)
4. Relocating an E4SA (continued)
Remove and Install the E4SA 4-22
Review Standard Operating Practices 4-22
Remove and Install the Adapter 4-24
Check the Installation of the E4SA 4-29
Resume Operations 4-31
Complete the Configuration Form 4-31
Add the E4SA Using SCF 4-34
A. E4SA Configuration Form
B. Preparing an E4SA for PMF or IOMF CRU Replacement
Safety and Compliance
Glossary
Index
Examples
Example 2-1. SCF STATUS Commands 2-17
Example 3-1. SCF INFO LIF Command 3-6
Example 3-2. SCF INFO SUBNET Command, NonStop TCP/IPv6 3-7
Example 3-3. SCF NAMES Command 3-8
Example 3-4. SCF INFO LINE Command 3-8
Example 3-5. SCF NAMES SUBSYS Command 3-9
Example 3-6. SCF INFO PROCESS Command 3-9
Example 3-7.
SCF LISTDEV Command 3-10
Example 3-8.
SCF INFO LINE Command 3-10
Example 3-9. SCF NAMES ADAPTER command 3-11
Example 3-10. SCF INFO ADAPTER command 3-11
Example 3-11. SCF INFO DEVICE command 3-12
Example 3-12. SCF STATUS LINE Command 3-13
Example 3-13. SCF STATUS PATH Command 3-13
Example 3-14. SCF STATUS DEVICE Command 3-14
Example 3-15. SCF STATUS ADAPTER Command 3-14
Example 3-16. SCF STATUS LINE Command 3-15
Example 3-17. SCF STATUS PATH Command 3-15
Example 3-18. SCF STATUS DEVICE Command 3-15
Example 3-19. SCF STATUS PROCESS Command 3-16