Ethernet Adapter Installation and Support Guide

Replacing an E4SA
Ethernet Adapter Installation and Support Guide—425684-003
3-15
Stop the Communications Lines and SWAN
Concentrator Lines Using an E4SA
a. Use the SCF STATUS LINE command for a single line:
STATUS LINE $line-name
Example 3-16 shows the output of this command. Note that the line is in the
STOPPED state.
b. Use the SCF STATUS PATH command for an Expand multiline path:
STATUS PATH $path-name
Example 3-17 shows the output of this command.Note that the path is in the
STOPPED state.
3. Stop the WAN subsystem input/output processes (IOPs).
Use the SCF STOP DEVICE command:
STOP DEVICE $ZZWAN.#device-name
4. Verify that the WAN subsystem IOPs are in the STOPPED state.
Use the SCF STATUS DEVICE command:
STATUS DEVICE $ZZWAN.#device-name
Example 3-18 shows the output of this command. Note that the WAN
subsystem input/output process (IOP) is in the STOPPED state.
Example 3-16. SCF STATUS LINE Command
->STATUS LINE $LINE1
EXPAND Status LINE
Name State PPID BPID CIU-Path ConMgr-LDEV
$LINE1 STOPPED 2, 10 3, 7 A 91
Example 3-17. SCF STATUS PATH Command
->STATUS PATH $PATH
EXPAND Status PATH
Name State PPID BPID Lines #
$PATH STOPPED 2, 15 3, 15 2
Example 3-18. SCF STATUS DEVICE Command
->STATUS DEVICE $ZZWAN.#LINE1
WAN Manager STATUS DEVICE for DEVICE \COWBOY.$ZZWAN.#LINE1
State :........ STOPPED
LDEV number.... 110
PPIN........... 2 ,13 BPIN......... 3 ,14