Ethernet Adapter Installation and Support Guide

Replacing an E4SA
Ethernet Adapter Installation and Support Guide—425684-003
3-20
Label the Communications Cables Connected to the
E4SA
2. Tag each communications cable connected to the E4SA with a physical label,
preferably at both ends. The label should include the following information:
•
The physical interface (PIF) name assigned to the line. For example,
E0154.0.A.
•
A description of the equipment and connector to which the cable is to be
connected.
•
The slot location of the E4SA to which the cable is connected.
Figure 3-3. E4SA Slot Locations
NonStop S-Series I/O
Enclosure
NonStop S-Series Processor
Enclosure
(Service Side)
(Service Side)
I/O enclosures can use slots
51 through 54 for E4SA CRUs
Processor enclosures can only use slots
53 and 54 for E4SA CRUs