Ethernet Adapter Installation and Support Guide

Replacing an E4SA
Ethernet Adapter Installation and Support Guide—425684-003
3-21
Replace the E4SA
Replace the E4SA
The following explains how to replace the E4SA. You must remove the adapter and
then replace it.
Review Standard Operating Practices
Standard operating practices include the following:
•
Work in an electrostatic discharge (ESD) protected environment.
•
Remove all metal accessories before working with electrical equipment.
•
Restrain any dangling items that can get caught in equipment.
•
Obtain an ESD protection kit and follow the directions that come with the kit.
Figure 3-4 on page 3-22 illustrates an ESD protected environment.
Table 3-2. Replacement Checklist
Step Description
1.
Review Standard Operating Practices
2.
Remove the Adapter
3.
Inspect the New E4SA and Backplane
4.
Unpack and Install the New E4SA
5.
Check the Installation of the New E4SA
Note. Whenever you handle an Ethernet 4 ServerNet adapter (E4SA), you should follow
standard operating practices to avoid damage to the equipment.