Ethernet Adapter Installation and Support Guide

Replacing an E4SA
Ethernet Adapter Installation and Support Guide—425684-003
3-38
Verify that the Communications Lines are Restarted
Example 3-34 on page 3-38 shows the output of this command. Note that
the ADAPTER, SERVER, PATH, and TASK objects are in the STARTED
state.
b. Verify that the WAN subsystem IOPs are in the STARTED state.
Use the SCF STATUS DEVICE command:
STATUS DEVICE $ZZWAN.#device-name
Example 3-35 shows the output of this command. Note that the WAN
subsystem input/output process (IOP) is in the STARTED state.
Note. Detailed information for only one communications line interface processor
(CLIP) is included in the display.
Example 3-34. SCF STATUS ADAPTER Command
->STATUS ADAPTER $ZZWAN.#S01, SUB ALL
WAN Manager STATUS ADAPTER for ADAPTER \COWBOY.$ZZWAN.#S01
State....... STARTED
Number of clips. 3
Clip 1 status : CONFIGURED
Clip 2 status : CONFIGURED
Clip 3 status : CONFIGURED
WAN Manager STATUS SERVER for CLIP \COWBOY.$ZZWAN.#S01.1
State :...... STARTED
Path A.......: CONFIGURED
Path B.......: CONFIGURED
Number of lines. 2
Line............ 0 : FREE
Line............ 1 : FREE
WAN Manager STATUS PATH for PATH \COWBOY.$ZZWAN.#S01.1.A
State :...... STARTED
MEDIA TYPE..... ETHERNET
MEDIA ADDRESS.. %H08008E004814
WAN Manager STATUS PATH for PATH \COWBOY.$ZZWAN.#S01.1.B
State :...... STARTED
MEDIA TYPE..... ETHERNET
MEDIA ADDRESS.. %H08008E004815
WAN Manager STATUS TASK for TASK \COWBOY.$ZZWAN.#S01.1.DIAG
State :...... STARTED
WAN Manager STATUS TASK for TASK \COWBOY.$ZZWAN.#S01.1.DLC0
State :...... STARTED
CLIP Path Name.... A TCPIP Port used.... 5000
CLIP Protocol Id.. 1 Interface Type..... 0
Clip Program...... $SYSTEM.CSS01.C1096P00
Program timestamp. 17 Jan 1997, 11:35:04.890
WAN Manager STATUS TASK for TASK \COWBOY.$ZZWAN.#S01.1.DLC1
State :........ STARTED
CLIP Path Name.... A TCPIP Port used.... 5001
CLIP Protocol Id.. 1 Interface Type..... 0
Clip Program...... $SYSTEM.CSS01.C1096P00
Program timestamp. 26 Mar 1997, 13:36:04.981