Event Management Service (EMS) Analyzer Manual

Command Descriptions
Event Management Service (EMS) Analyzer Manual–133700
5-24
DISPLAYEXTCHAR
DISPLAYEXTCHAR
The DISPLAYEXTCHAR command enables or disables the display of extended
characters.
ON
causes the display of extended characters.
OFF
disables the display of extended characters. This is the default.
DUMPLOG
The DUMPLOG command starts the search for the EMS events.
/OUT file-spec/
directs any EMS Analyzer output generated for this command to the specified file.
object-spec
designates the object to be used to perform the search. This parameter requires the
name of the current EMS Analyzer distributor. If object-spec is omitted, the
assumed object is used. See the EMS Analyzer ASSUME
command. If the assumed
object is not the current EMS Analyzer distributor, an error occurs.
Considerations
•
The current EMS Analyzer distributor is used to perform the search for the specified
events.
•
Any filter can be used with the current EMS Analyzer distributor.
DISPLAYEXTCHAR [ ON | OFF ]
DUMPLOG [ /OUT file-spec/ ] [ object-spec ]