Event Management Service (EMS) Analyzer Manual
Command Descriptions
Event Management Service (EMS) Analyzer Manual–133700
5-31
INFO
number
is the number of command lines to be displayed. If omitted, the 10 most recently
entered commands display.
Considerations
•
EMS Analyzer history buffer is 1024 bytes in memory. The exact number of
retrievable command lines depends on the length of the commands.
•
The command lines are saved in the history buffer exactly as they were entered, with
the exception of the FC and ! commands. The command lines generated by these
commands display instead of the commands themselves.
•
The HISTORY command cannot be issued by a noninteractive user.
Examples
displays the last 10 commands.
displays the last 22 commands.
INFO
The INFO command displays the current attribute values for the specified object or
objects.
/OUT file-spec/
directs any EMS Analyzer output generated for this command to the specified file.
object-spec
designates the object or objects whose attribute values are to be displayed. If
object-spec is omitted, attribute values for the assumed object display. See the
EMS Analyzer ASSUME command.
Consideration
Use the STATUS command to display dynamic information about objects.
-> HISTORY
-> HISTORY 22
INFO [ /OUT file-spec/ ] [ object-spec ]