Event Management Service (EMS) Analyzer Manual

Command Descriptions
Event Management Service (EMS) Analyzer Manual–133700
5-43
START
REVERSE
displays the prompt in reverse video.
SYSTEM
displays the current system name.
VOLUME
displays the default volume and subvolume names.
ALL
enables all prompt-options.
NONE
disables all prompt-options.
Considerations
•
The REVERSE and DIM options can be used only on a Tandem 6530 or 6520
terminal or a device operating as a 6530 emulator. If these options are enabled on
any other terminal, the following error message displays:
EMSA 20210 Invalid terminal type for REVERSE and/or DIM
option.
•
If the NONE option is specified, all the prompt-options are returned to their
default settings.
•
By default, the prompt-option NUMBER is enabled and all others are disabled.
Examples
START
The START command initiates the operation of an object.
/OUT file-spec/
directs any EMS Analyzer output generated for this command to the specified file.
-> assume distributor $z123
-> setprompt all, no volume
\SYS1 DISTRIBUTOR $Z123 3-> setprompt no object, no number
\SYS1 -> setprompt volume
\SYS1 $DATA.MYSUBVOL ->
START [ /OUT file-spec/ ] [ object-spec ] [, PRI pri-number ]
[, CPU cpu-number ]