Event Management Service (EMS) Analyzer Manual

Command Descriptions
Event Management Service (EMS) Analyzer Manual–133700
5-46
STATUS
•
Coll log is the name of the current active EMS log file. This is displayed only if
the distributor is in collector mode.
•
Current log is the name of the EMS log file in which the distributor is currently
positioned.
•
Coll state is one of the following distributor states, which are associated with
the named source collector: UNUSED, IDLE, FETCHING EVENT, PERFORMING
STATUS or POSITIONING. This displays only if the distributor is in collector
mode.
•
Coll IO status is one of the following distributor I/O status alternatives,
which are associated with the named source collector: NO IO, READING LOG,
NORMAL STATUS and EVENT WAIT STATUS. Displayed only if the distributor
is in collector mode.
•
Record address is the record address of the last event message examined by
the distributor. This displays only if the distributor is in collector mode, and consists
of the following parts:
•
Block is the current block number.
•
Record is the record number within the block.
•
Coll event filtered is the number of event messages from this collector
that have passed the filter. This number displays only if the distributor is in collector
mode.
•
Coll event total is the number of event messages received from this
collector. This number displays only if the distributor is in collector mode.
•
Coll event logging is one of the following alternatives: IN PROGRESS or
STOPPED. This means that logging is proceeding normally or that logging is
stopped because of a problem. Displayed only if the distributor is in collector mode.
•
Event filtered is the number of event messages that passed the filter since
the last filter load.
•
Event total is the total number of event messages that have been processed by
the filter since the last filter load.
•
Event processing is one of the following: ACTIVATED or SUSPENDED.