Event Management Service (EMS) Analyzer Manual

Command Descriptions
Event Management Service (EMS) Analyzer Manual–133700
5-47
STATUS
This is a sample of output for a consumer distributor (file mode).
This is a sample of output for a forwarding distributor.
•
Target name is the name of a collector process that receives forwarded event
messages.
•
Target state is one of the following collector states: DISCONNECTED,
WRITE PENDING, IDLE, or RETRYING ON ERROR.
-> STATUS DISTRIBUTOR $Z467
EMSA STATUS DISTRIBUTOR $Z467
Distributor type. CONSUMER Filter..... $STING.EMSA.EMSAFLTR
PPID............. 02,074 BPID....... NOT CONFIGURED
Priority......... 149 Last error. 0
Current position. 91JUL25, 09:12:28
Emslog.............. $0.#ZSPI
Event filtered...... 2
Event total......... 16
Event processing.... ACTIVATED
-> STATUS DISTRIBUTOR $Z345
EMSA STATUS DISTRIBUTOR $Z345
Distributor type. FORWARDING Filter.....
PPID............. 01,032 BPID....... NOT CONFIGURED
Priority......... 148 Last error. 0
Current position. 91JUL30, 01:00:00
Emslog.............. $0.#ZSPI
Coll log............ $SYSTEM.ZLOG00.ZZEV0004
Current log......... $SYSTEM.ZLOG00.ZZEV0004
Coll state.......... IDLE
Coll IO status...... NO IO
Record address...... Block 298 Record 2
Coll event filtered. 0
Coll event total.... 0
Coll event logging.. IN PROGRESS
Emslog.............. \CASTOR.$0.#ZSPI
Coll log............ \CASTOR.$SYSTEM.ZLOG30.ZZEV0056
Current log......... \CASTOR.$SYSTEM.ZLOG30.ZZEV0056
Coll state.......... IDLE
Coll IO status...... NO IO
Record address...... Block 71 Record 4
Coll event filtered. 0
Coll event total.... 0
Coll event logging.. IN PROGRESS
Target name......... \MTL.$0
Target state........ IDLE
Event filtered...... 0
Event total......... 0
Event processing.... ACTIVATED