Event Management Service (EMS) Analyzer Manual

Command Descriptions
Event Management Service (EMS) Analyzer Manual–133700
5-49
SYSTEM
Examples
SYSTEM
The SYSTEM command designates the default system name for all file name and object
name expansion.
/OUT file-spec/
causes any EMS Analyzer output generated for this command to be directed to the
specified file.
\system-name
is the system name that is to become the default system name. If \system-name is
omitted, the system name from the beginning of the EMS Analyzer session is used.
Consideration
When an EMS Analyzer session begins, the default system name is the system name
obtained from the startup message.
Examples
TIMEOUT
Use the TIMEOUT command to vary the amount of time EMS Analyzer waits for a
response from a server before canceling the request.
/OUT file-spec/
causes any EMS Analyzer output generated for this command to be directed to the
specified file.
time
designates the amount of time EMS Analyzer waits for a response from a distributor
process. If time is omitted, EMS Analyzer waits 90 seconds. The maximum
-> STOP DISTRIBUTOR $dist
-> STOP /OUT OutStop/ DISTRIBUTOR $dist
SYSTEM [ /OUT file-spec/ ] [ \system-name ]
-> SYSTEM \B7
-> SYSTEM \SD
-> SYSTEM
TIMEOUT [ /OUT file-spec/ ] [ time ]