Event Management Service (EMS) Analyzer Manual

Error Messages
Event Management Service (EMS) Analyzer Manual–133700
E-10
Error Messages
EMSA 20090
Cause. The specified value is out of range.
Recovery. Specify a value within range.
EMSA 20091
Cause. A REPEAT command was specified prior to the execution of this command.
Recovery. Do not specify the REPEAT command in conjunction with this command.
EMSA 20092
Cause. Too many repeat commands were specified on long command lines.
Recovery. Put commands to be repeated in an OBEY
file and repeat the execution of
the OBEY file.
EMSA 20093
Cause. The HELP command was entered without any help subject.
Recovery. Either leave the HELP command out of the repeated command or issue the
HELP command without first issuing the REPEAT command.
EMSA 20095
Cause. There are no aliases defined which match the wildcard entered.
Recovery. Use another wildcard or print out all the aliases by not specifying the alias
name portion of the command.
<name> value must be from <lower-bound> to <upper-bound>
This command is not allowed when a repeat command has been
issued.
Repeat command stack overflow, command not available.
Menu Mode HELP cannot be used in a REPEATed command.
No aliases match the wildcard.