Event Management Service (EMS) Analyzer Manual

Error Messages
Event Management Service (EMS) Analyzer Manual–133700
E-13
Error Messages
EMSA 20112
Cause. This message informs the user that processing has been terminated because the
maximum number of errors set by the ALLOW command has been exceeded.
Recovery. Either correct the conditions that cause the errors or increase the number of
allowable errors with the ALLOW
command.
EMSA 20113
Cause. This message informs the user that processing has been terminated because the
maximum number of warnings set by the ALLOW command has been exceeded.
Recovery. Either correct the conditions that cause the warnings or increase the number
of allowable warnings with the ALLOW
command.
EMSA 20114
Cause. The ASSIGN/PARAM command or assign/param message cannot be processed
because the allocated space was exceeded.
Recovery. Clear unneeded assigns/params via the CLEAR
command.
EMSA 20116
Cause. The home terminal was unavailable.
Recovery. If the hometerm was specified in the RUN
command, then specify a different
home terminal; otherwise, consult your system manager.
EMSA 20117
Cause. The specified DEFINEs could not be processed.
Recovery. Consult your system manager.
Maximum number of allowable errors exceeded
Maximum number of allowable warnings exceeded
ASSIGN/PARAM message exceeds allocated space
NEWPROCESS error 16: I/O error on home terminal
NEWPROCESS error 17: DEFINE context error