Event Management Service (EMS) Analyzer Manual

Error Messages
Event Management Service (EMS) Analyzer Manual–133700
E-19
Error Messages
EMSA 20307
Cause. The attempt to cancel an I/O pending operation on the distributor failed.
Recovery. Try to perform other commands on this distributor. If there is some errors,
stop the distributor (see STOP
command) and restart (see START command) another
one.
EMSA 20308
Cause. The specified device is not a collector.
Recovery. Specify a collector device.
EMSA 20309
Cause. The specified device number is not in the valid range. All the following
attributes on the command line, if there is some, are not altered.
Recovery. Specify a valid device number in the range [0..4095].
EMSA 20310
Cause. The specified CPU is not in the valid range. All the following attributes on the
command line, if there is some, are not altered.
Recovery. Specify a valid CPU number in the range [0..15].
EMSA 20311
Cause. The specified PIN is not in the valid range. All the following attributes on the
command line, if there is some, are not altered.
Recovery. Specify a valid pin number in the range [0..255].
File system error <nnnn> occurred while trying to cancel a
request
This is not a collector device
Logical device number must be in range [0..4095]
CPU must be in range [0..15]
PIN must be in range [0..255]