Event Management Service (EMS) Analyzer Manual

Error Messages
Event Management Service (EMS) Analyzer Manual–133700
E-24
Error Messages
EMSA 30301
Cause. The distributor is already configured the way you specified it.
Recovery. No specific action required.
EMSA 30302
Cause. The distributor cannot be started since the program file name EMSDIST cannot
be found.
Recovery. Report this problem to your System Manager.
EMSA 30303
Cause. The FNB is not valid.
Recovery. Contact your Tandem representative.
EMSA 30305
Cause. An internal procedure was called with a missing parameter.
Recovery. Contact your Tandem representative.
EMSA 30306
Cause. There was too many filter parameters loaded in configuration.
Recovery. Try to alter less filter parameters in the same ALTER
command. If the
problem persists, contact your Tandem representative.
The configuration was not sent to the distributor because it
is already configured that way
The EMSDIST program file name was not found
Invalid FNB
There was a missing parameter in a procedure call
The filter parameter list is full