Event Management Service (EMS) Analyzer Manual

Error Messages
Event Management Service (EMS) Analyzer Manual–133700
E-27
Error Messages
EMSA 30502
Cause. You specified a start time for which EMS events have not been kept in EMS log
files. They are not available anymore.
Recovery. The distributor is now positioned by default at BOF. You can do research
from BOF, or specify a later start time value.
EMSA 30503
Cause. You specified a start time for which EMS events have not been generated yet.
Recovery. Specify an earlier start time value.
EMSA 31001
Cause. The distributor does not support the version that was supplied in the command
message.
Recovery. Contact your Tandem representative.
EMSA 31002
Cause. The distributor has received an invalid command message.
Recovery. Try the command again and if the problem persists, contact your Tandem
representative.
EMSA 31003
Cause. The distributor has received a command message with an invalid subsystem ID
(from a command buffer not owned by EMS).
Recovery. Try the command again and if the problem persists, contact your Tandem
representative.
Event messages for this timestamp are not available anymore
Event messages for this timestamp are not available yet
Supplied version not supported
Invalid command message
Invalid SSID in command message