Event Management Service (EMS) Analyzer Manual

Error Messages
Event Management Service (EMS) Analyzer Manual–133700
E-35
Interprocess Communication Error Messages
-00025
Cause. A command using the SUB modifier was issued but, no subordinate objects
were found. This error is applicable only when the SUB modifier contains the SUB-
ONLY value, or the value of a specific object type.
Recovery. This is a warning. No action is necessary.
Interprocess Communication Error Messages
The following listing defines the interprocess communication errors you might
encounter when using EMS Analyzer.
-00003
Cause. The command is invalid in its current summary state. A command was issued
and the current summary state of the target object prevents processing of the command.
This error is returned whenever the state-transition specification is not met.
Recovery. Ensure that the target object is in a summary state compatible with the
command to be issued.
-00004
Cause. A command was issued, and the object contained in the command buffer is not a
valid type for the command.
Recovery. Refer to the subsystem specific reference manual for the subsystem with
which you are communicating for information about the command and its associated
object types.
-00005
Cause. A command was issued that was unknown to the subsystem that owns the object
name.
Recovery. Refer to the subsystem specific reference manual for the subsystem with
which you are communicating for information about the commands supported by that
subsystem.
Object <name> has no subordinates
Command not allowed while object in <state> state for
<obj name>
Command/object type combination is not valid for this
subsystem
Command is not supported by this subsystem