Event Management Service (EMS) Analyzer Manual

Error Messages

Event Management Service (EMS) Analyzer Manual–133700

E-41

Interprocess Communication Error Messages

-00033

Cause. There was no more data to display in response to a continuation request from

EMS Analyzer to the subsystem.

Recovery. Contact your TANDEM representative.

-00034

Cause. The attribute specified is required in conjunction with one of the attributes for

the named object.

Recovery. Add the specified attribute with an appropriate value and reissue the

command.

-00035

Cause. The attribute named conflicts with one or more of the other attributes for the

specified object.

Recovery. Reissue the command, deleting the named attribute.

-00036

Cause. The particular value specified with the named attribute conflicts with one of the

other attribute values for the object.

Recovery. Specify a different value or delete the attribute, and reissue the command.

-00037

Cause. The command power specified on the command was insufficient to change the

state of the object.

Recovery. Reissue the command with a higher command power level.

Internal Error: Empty SPI response

Attribute <attribute name> is required in conjunction with

Attribute <attribute name> may not be used with <attribute

name> for <object name>

Value of attribute <attribute name> may not be used in

conjunction <attribute name> for <object name>

Command power level too weak for the state of object <object

name>