Exchange/RJE Manual

WRITE Procedure
Exchange/RJE System Procedure Calls
104698 Tandem Computers Incorporated 5–39
All blocks transmitted with an error (the remote system responded with an NAK) are
automatically transmitted again. The number of retries allowed before the write
operation is terminated is specified for the data communications line during system
generation.
Considerations The WRITE procedure writes a record from your program to the Exchange/RJE line
server for transmission to the remote system. You can also use the WRITEREAD
procedure to do this. For information on using WRITEREAD, see the WRITEREAD
procedure later in this section.
If you opened the Exchange/RJE line server for nowait I/O, you must call AWAITIO
to complete an I/O operation initiated by a call to WRITE.