Exchange/RJE Manual

Trace Server Messages
Exchange/RJE Messages
104698 Tandem Computers Incorporated A–13
RJCI48E OPTION CAN NOT BE action WHILE CONNECTED TO A LINE
SERVER
Problem. You have attempted to change a configuration parameter while connected to
a line server. Configuration parameters cannot be changed while connected to a line
server.
Solution. Use the DISCONNECT command to disconnect from the line server, and then
change the configuration parameter using the SET command.
RJCI49 message
Comment. No action is required.
RJCI50E RECORD SIZE ( recsize ) IS GREATER THAN THE MAXIMUM
RJCI50* RECORD SIZE ALLOWED BY THE CURRENT CONFIGURATION
( max^recsize )
Problem. recsize , the record size entered in a SEND or RECEIVE command (or the
default record size in a SEND command), must not be greater than the maximum
record size allowed by the current configuration.
Solution. Enter the SEND or RECEIVE command again, and specify a smaller record
size.
RJCI51E DROPEM IS REQUIRED WITH THE CURRENT CONFIGURATION
Problem. The DROPEM parameter is required for the current configuration.
Solution. Enter the command again and specify the DROPEM parameter.