Exchange/RJE Manual

Trace Server Messages
Exchange/RJE Messages
A–14 104698 Tandem Computers Incorporated
RJCI52E RECORD SIZE MUST BE GREATER THAN ZERO (0)
Problem. You have entered a record size less than one (1) in a SEND or RECEIVE
command.
Solution. Enter the command again, and specify a record size of at least 1.
RJCI53E FILE filename IS NOT A TRACE FILE
Problem. You have entered a DUMP command in which the specified file is not a trace
file.
Solution. Enter the DUMP command again, and specify a trace file.
RJCI54E TRACE FILE filename IS EMPTY
Problem. The specified trace file is empty. Either no communications occurred over the
line, or the TRACE STOP command has not been executed and all trace records are
still in the trace server's buffers.
Solution. Use the TRACE STOP command, and stop the trace server. Try the DUMP
command again.
RJCI55E TRACE FILE filename FORMAT IS
RJCI55* BAD configuration-record/trace-information-block
Problem. The DUMP command is unable to display the trace file. This may be due to
the trace server being stopped in some way other than by using the TRACE STOP
command.
Solution. Perform the trace operation again, and be sure to end the trace operation with
the TRACE STOP command.