Exchange/RJE Manual

Trace Server Messages
Exchange/RJE Messages
A–16 104698 Tandem Computers Incorporated
RJCI62 ============= ...
Comment. The heading for the output of the SHOW command.
RJCI65 DIALING PHONE NUMBER number
Comment. The specified telephone number is being dialed. No action is required.
RJCI66 DATASET IS NOT READY - name
Comment. No action is required.
RJCI67E RECSIZE MUST BE 80 WHEN USING send/receive OPTION
[ NOTRANSLATE | TRANSPARENT ]
Problem. The value of the RECSIZE parameter must be 80 when either
NOTRANSLATE or TRANSPARENT is specified.
Solution. Enter the command again, and specify 80 as the value of RECSIZE. For send
only you may omit the RECSIZE parameter, in which case its default value of 80 is
used.
RJCI68 COMPRESS CANNOT BE USED WITH THE CURRENT MODE OF
OPERATION
Problem. You have specified COMPRESS in a SEND command. The COMPRESS
parameter is not allowed in 2780-emulation mode, block mode with 2780 blocking, or
block mode without blocking.
Solution. Enter the SEND command again without the COMPRESS parameter.