Exchange/RJE Manual

Trace Server Messages
Exchange/RJE Messages
A–18 104698 Tandem Computers Incorporated
RJCI75E DIAL PARAMETER MUST NOT BE SPECIFIED FOR NONSWITCHED
LINE
Problem. You have entered a DIAL parameter in the CONNECT command and the line
is nonswitched. The operation is aborted.
Solution. Remove the DIAL parameter from the CONNECT command specification
when you are connecting to a nonswitched line.
RJCI76 NO DATA BLOCK FOUND FOR THIS REQUEST
Comment. A trace record was specified that does not exist within the specified trace
file.
RJCI77 TRACE DATA LOST PRIOR TO THIS TRACE ENTRY
Comment. Trace data has been lost prior to this trace entry.
RJCI79E TRACE COMMAND IS REQUIRED TO COMPLETE CONNECT
Problem. The TRACE configuration parameter has been set ON, which requires that
the trace server be started before the connection can be completed, and the trace server
has not been started.
Solution. Use the TRACE command to start the trace server.
RJCI80W SERVER name IS TERMINATED
Comment. No action is required.