Exchange/RJE Manual

Send/Receive Server Messages
Exchange/RJE Messages
104698 Tandem Computers Incorporated A–23
RJSR13E REMOTE STATION HAS FAILED TO ACKNOWLEDGE RECEIPT OF A
TRANSMISSION
RJSR13* FILE MANAGEMENT SYSTEM ERROR - number
Problem. The remote system has failed to acknowledge a transmission from
Exchange/RJE. This can happen because the data communications line failed (or
never worked) or the remote system failed.
Solution. Correct the indicated error, and try the operation again.
RJSR14 FILE TRANSMISSION HAS BEEN completed/aborted
/ interrupted
Comment. The send operation has finished or aborted, or it has been interrupted.
RJSR15W PUNCH DATA IS BEING DIRECTED TO THE PRINT FILE
Problem. Punch data has been received from the remote system, and no punch file was
specified in the RECEIVE command. The punch data is being written to the print file.
Solution. Use the punch data in the print file, or repeat the operation and specify a
punch file in the RECEIVE command.
RJSR16W RECEIVED AN END-OF-TRANSMISSION PRIOR TO END-OF-TEXT
RJSR16* POSSIBILITY OF INCOMPLETE FILES EXIST
RJSR16* FILE MANAGEMENT SYSTEM ERROR - number
Problem. Exchange/RJE received an EOT before an ETX; this is not the normal way to
end a transmission and may indicate an error on the remote system. The file received
from the remote system may be incomplete.
Solution. Determine whether or not an error occurred on the remote system. If an error
did occur, correct the problem. Try the operation again.